STM POWERSPORTS TOOLS & COMPONENTS

Replacement fixed sheave for the stock Pro-R (4 Cylinder Models) / Fixed sheave and post only Made from all billet components.No need to send in components from your stock primary.This is a drop in replacement for the OEM Primary clutch

Can-Am Tuner Secondary STM Gen 2 Fixed sheave assembly includes sheave part# 3001020 and post part# 3001002 for the stock or STM Rage 3S primary offset tuners only.Rollers Included With The Rear Sheave

Spider retaining nut STM Rage Primary Clutches. If you have a question on if this is the correct part for your STM primary clutch. Give us a direct reach! 315-530-2512 Monday - Friday / 10am - 6pm

Replacement sheave for the Can-Am STM Tuner Secondary Gen 2.Includes bushing and bushing retaining clip installed.

This is the flange only from the first photo that fits the clutch housing shown in the second photo (HOUSING IS NOT INCLUDED JUST THE FLANGE FROM THE 1st PHOTO). If you have this style cover (2nd PHOTO) then the flange is required for...

STM Can-Am tuner movable sheave bushing. If you have a question on if this is the correct part for your STM secondary clutch. Give us a direct reach! 315-530-2512 Monday - Friday / 10am - 6pm

STM ATV Tuner Secondary Belt Shims Set of 6. Used to set the belt deflection on the STM tuner secondary's with a 1.5" dia post If you have a question on if this is the correct part for your STM secondary clutch. Give us...

Reverse rotation helix for the STM Gen 1 style tuner secondary If you have a question on if this is the correct helix for your STM secondary clutch. Give us a direct reach! 315-530-2512 Monday - Friday / 10am - 6pm

This tool will give you the availability to be able to torque your (non HD) STM primary clutch 4&8 arm spiders to the proper torque specs listed in the instructions received upon original clutch order. This tool will allow you to utilize a 1"...

STM Powersports ATV and UTV rage 3 & 6 primary clutch cover screws.  Only use blue loctite with the cover screws!  If you have a question on if this is the correct part for your STM clutch. Give us a direct reach! 315-530-2512 Monday...

STM Tuner Secondary roller pin (pull dowel) Sold individually

This is a Gen 2 style sleeved bearing. Only works with sheaves that have previously had this bearing. Only works with sheaves that have previously had 47mm bearing. If you have a question on if this is the correct bearing for your STM primary...

STM POWERSPORTS Secondary Clutch Replacement Roller. If you are unsure of fitment, please reach out to us directly. Call direct 315-530-2512 These are sold individually.  When changing the rollers you will also need replacement pins. That is an optional add if you already have...

Washers Are Sold individually. Clutch requires 2 washers.  Thrust washers are for your primary clutch 2-way bearing. These are an essential component to proper clutch performance. If these washers are worn out or non-existant, you will want to get them replaced immediately, and if...

A heavy duty tool (also known as the grunt tool) that allows you to remove and install your spider. It will work on the primary clutch cover as well to hold it from turning while torquing the clutch bolt. This tool works on all...

This compression tool will allow you to change weights in your STM primary clutch without removing it from the crank. Simply remove the belt and clutch bolt, screw in the thread rod with the plastic cup and tighten the nut to collapse the sheaves....

This is the updated replacement part for part# 1001015. Made from forged 7075. Comes assembled complete with rollers and buttons. Rollers and buttons are replaceable. We also have a grunt (spider) tool that can be purchased separately part#1001020

STM ATV helix cover to be used with the PS or KSS style springs. Original part#'s were 1001007 and 1001009 and has been updated to fit both HD and non-HD springs. If you have a question on if this is the correct fitment for...

ONLY WORKS IN STM CLUTCHES **Updated part # from 28ACS312** Sold in a per arm set. 1 pin and bushing set per arm is needed. Works with non-fixed style cam arms Non-Fixed Pin only works with cam arms that have a bushing. Updated from...

Pin roller kit for 3 and 6 arm spider. NOT FOR USE IN 3VL PRIMARY CLUTCHES! for 3vl pin roller kits please acll in 315-530-2512 This kit includes new buttons, rollers with composite style bushings, and spider pins. Also used as a replacement for...