Can Am Outlander 500 - 1000 Velocity Primary Clutch STM Rage 3

The Newest addition to our Rage3 line of primary clutches. STM Rage-3 VELOCITY Primary Can-Am / For Outlander Models with the stock P-Drive system

The Rage-3 VELOCITY is an STM primary designed with the stock offset, allowing it to be used with the stock secondary.

Upon ordering: Please email Trevor@NorthCountryBoyz.Com or Call 315-530-2512! Your machine specifics will be needed in order to have the clutches built to spec for your machine.

This clutch offers extremely smooth low engagement with improved torque. The clutch also offers cooler belt operating temperatures, as tested.  

New improved two-way bearing design. The main shaft bearing is now smaller with a 47mm outside diameter, allowing a lower initial takeoff ratio than our past design. Allows tighter belt deflection and smoother transmission shifting.

An affordable replacement for the stock primary clutch. Complete billet design that outperforms the existing primary. Using our adjustable SUPERTIP CAM ARMS with the Rage 3 is the perfect recipe for your stock or modified Can-Am. These STM clutches will fit under the stock cover with no interference. The Rage 3 is capable of using most cam arms that are available on the market. All parts are replaceable and stocked.

The cover is designed to use Polaris ATV springs, which provide a wide variety of spring rates to choose from. 

The Rage 3 comes calibrated with a spring and a set of our own adjustable SUPERTIP CAM ARMS.

Includes a new bolt for installation (excluding XDS Turbo Models. They use a stock BRP bolt with an included STM retaining washer.

Each clutch is assembled and set up to run the BRP OEM belt

This primary will work with the stock secondary.  

https://stmpowersports.com/stm-rage-3-velocity-primary-can-am-for-outlander-models-with-the-stock-p-drive-system/?searchid=1113304&search_query=velocity